# changelog

author: Ronan Pigott <ronan.pigott@oracle.com> - 239-82.0.2.2
changelog:
  - drop IN_ATTRIB from parent directory inotify watches [Orabug: 36780432]
  - Udevd: add an extra configurable timeout before udevd kills workers [Orabug: 36424686]
  - Fixed deletion issue for symlink when device is opened [Orabug: 36228608]
  - Fix local-fs and remote-fs targets during system boot (replaces old Orabug: 25897792) [Orabug: 35871376]
  - 1A) Add "systemd-fstab-generator-reload-targets.service" file [Orabug: 35871376]
  - 1B) Add required rpms for correct kickstart/systemd functionality within systemd.spec [Orabug: 35871376]
  - 1C) Important: Review 1902-systemd-fstab-generator-reload-targets.patch for important build details/steps [Orabug: 35871376]
  - Prevent duplicate uuid device to replace existing one in udev [Orabug: 35987487]
  - Backport upstream pstore dmesg fix [Orabug: 34850699]
  - mount: flush out cycle state on DEAD->MOUNTED only, not the other way round [Orabug: 35454661]
  - core/mount: adjust deserialized state based on /proc/self/mountinfo [Orabug: 35454661]
  - Prevent duplicate label to replace exsisting one in udev [Orabug: 34898273]
  - Oracle-Redhat Errata ELSA-2023:3837 CVE-2023-26604 OLERRATA-43629
  - Detect podman as separate container type [Orabug: 31922204]
  - improve container detection logic [Orabug: 31922204]
  - mount: flush out cycle state on DEAD->MOUNTED only, not the other way round [Orabug: 35454661]
  - core/mount: adjust deserialized state based on /proc/self/mountinfo [Orabug: 35454661]
  - Prevent duplicate label to replace existing one in udev [Orabug: 34898273]
  - Standardize ioctl (BTRFS_IOC_QGROUP_CREATE) check and return -ENOTCONN, if quota is not enabled [Orabug: 34694253]
  - Disable unprivileged BPF by default [Orabug: 32870980]
  - udev rules: fix memory hot add and remove [Orabug: 31310273]
  - fix to enable systemd-pstore.service [Orabug: 30951066]
  - journal: change support URL shown in the catalog entries [Orabug: 30853009]
  - set "RemoveIPC=no" in logind.conf as default for OL7.2 [Orabug: 22224874]
  - allow dm remove ioctl to co-operate with UEK3 (Vaughan Cao) [Orabug: 18467469]
  - Backport upstream patches for the new systemd-pstore tool (Eric DeVolder) [OraBug: 30230056]
  - Removed unneeded patches (Already provided upstream or not required)
  - 1902-Fix-missing-netdev-for-iscsi-entry-in-fstab.patch [Orabug: 25897792]
  - 2002-orabug31420486-pstore-introduce-tmpfiles.d-systemd-pstore.conf.patch [Orabug: 31420486]
  - 2009-login-add-a-missing-error-check-for-session_set_lead.patch (#2158167)
  - 2010-logind-reset-session-leader-if-we-know-for-a-fact-th.patch (#2158167)
  - 2011-sulogin-fix-control-lost-of-the-current-terminal-whe.patch (#2227769)
  - systemd.spec: prevent 'myhostname' from being appended on upgrade (#2187761) (#2227769)
  - Updated mod_nss() and readlink /etc/nsswitch.conf sections (#2187761)
  - systemd.spec: mod_nss() and readlink /etc/nsswitch.conf sections (#2187761)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-82.3
changelog:
  - ci: update actions/upload-artifact to `v4` (RHEL-32494)
  - ci: drop unused variable (RHEL-32494)
  - core: add possibility to not track certain unit types (RHEL-5877)
  - logind: don't setup idle session watch for lock-screen and greeter (RHEL-19215)
  - logind: tighten for which classes of sessions we do stop-on-idle (RHEL-19215)
  - ci: point C8S containers to the Vault (RHEL-1087)


author: Sourav Sharma <sourav.ss.sharma@oracle.com> - 239-82.0.3.3
changelog:
  - Fixes podman quadlet doesn't work in rootless mode [Orabug: 36076771]
  - Drastically simplify caching of cgroups members mask


author: EL Errata <el-errata_ww@oracle.com> - 239-82.0.3.4
changelog:
  - Fixes podman quadlet doesn't work in rootless mode [Orabug: 36076771]
  - Drastically simplify caching of cgroups members mask
  - drop IN_ATTRIB from parent directory inotify watches [Orabug: 36780432]
  - Udevd: add an extra configurable timeout before udevd kills workers [Orabug: 36424686]
  - Fixed deletion issue for symlink when device is opened [Orabug: 36228608]
  - Fix local-fs and remote-fs targets during system boot (replaces old Orabug: 25897792) [Orabug: 35871376]
  - 1A) Add "systemd-fstab-generator-reload-targets.service" file [Orabug: 35871376]
  - 1B) Add required rpms for correct kickstart/systemd functionality within systemd.spec [Orabug: 35871376]
  - 1C) Important: Review 1902-systemd-fstab-generator-reload-targets.patch for important build details/steps [Orabug: 35871376]
  - Prevent duplicate uuid device to replace existing one in udev [Orabug: 35987487]
  - Backport upstream pstore dmesg fix [Orabug: 34850699]
  - mount: flush out cycle state on DEAD->MOUNTED only, not the other way round [Orabug: 35454661]
  - core/mount: adjust deserialized state based on /proc/self/mountinfo [Orabug: 35454661]
  - Prevent duplicate label to replace exsisting one in udev [Orabug: 34898273]
  - Oracle-Redhat Errata ELSA-2023:3837 CVE-2023-26604 OLERRATA-43629
  - Detect podman as separate container type [Orabug: 31922204]
  - improve container detection logic [Orabug: 31922204]
  - mount: flush out cycle state on DEAD->MOUNTED only, not the other way round [Orabug: 35454661]
  - core/mount: adjust deserialized state based on /proc/self/mountinfo [Orabug: 35454661]
  - Prevent duplicate label to replace existing one in udev [Orabug: 34898273]
  - Standardize ioctl (BTRFS_IOC_QGROUP_CREATE) check and return -ENOTCONN, if quota is not enabled [Orabug: 34694253]
  - Disable unprivileged BPF by default [Orabug: 32870980]
  - udev rules: fix memory hot add and remove [Orabug: 31310273]
  - fix to enable systemd-pstore.service [Orabug: 30951066]
  - journal: change support URL shown in the catalog entries [Orabug: 30853009]
  - set "RemoveIPC=no" in logind.conf as default for OL7.2 [Orabug: 22224874]
  - allow dm remove ioctl to co-operate with UEK3 (Vaughan Cao) [Orabug: 18467469]
  - Backport upstream patches for the new systemd-pstore tool (Eric DeVolder) [OraBug: 30230056]
  - Removed unneeded patches (Already provided upstream or not required)
  - 1902-Fix-missing-netdev-for-iscsi-entry-in-fstab.patch [Orabug: 25897792]
  - 2002-orabug31420486-pstore-introduce-tmpfiles.d-systemd-pstore.conf.patch [Orabug: 31420486]
  - 2009-login-add-a-missing-error-check-for-session_set_lead.patch (#2158167)
  - 2010-logind-reset-session-leader-if-we-know-for-a-fact-th.patch (#2158167)
  - 2011-sulogin-fix-control-lost-of-the-current-terminal-whe.patch (#2227769)
  - systemd.spec: prevent 'myhostname' from being appended on upgrade (#2187761) (#2227769)
  - Updated mod_nss() and readlink /etc/nsswitch.conf sections (#2187761)
  - systemd.spec: mod_nss() and readlink /etc/nsswitch.conf sections (#2187761)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-82.5
changelog:
  - man: be even clearer that tmpfiles user/group/mode are applied on existing inodes (RHEL-77145)
  - Revert "man: fix description of --force in halt(8) (#7392)" (RHEL-81056)
  - man: explicitly document that "reboot -f" is different from "systemctl reboot -f" (RHEL-81056)


author: Ronan Pigott <ronan.pigott@oracle.com> - 239-82.0.5.5
changelog:
  - Stash the dbus subscriber list when we disconnect from the bus [Orabug: 38028720]
  - Drop systemd-nspawn delay on failing to reset loginuid [Orabug: 37782633]


author: Ondrej Dubaj <odubaj@redhat.com> - 1.30-6
changelog:
  - added "padding with zeros" info message (#1913566)
  - do not report disk error as file shrank (#1913569)


author: Pavel Cahyna <pcahyna@redhat.com> - 2:1.30-10
changelog:
  - Warn “file changed as we read it” less often
  - Add downstream patch to fix related failure in filerem01 test


author: Pavel Cahyna <pcahyna@redhat.com> - 2:1.30-11
changelog:
  - Backport fix for regression in the --no-overwrite-dir option fix (1.30-7)
    Upstream commit 4e742fc8674064a9fa00d4483d06aca48d5b0463, discussed
    in https://www.mail-archive.com/bug-tar@gnu.org/msg06445.html


author: Pavel Raiskup <praiskup@redhat.com> - 1.29-3
changelog:
  - revert back some docs
  - fix --create to use --xattrs-include/exclude (rhbz#1341787)
  - don't hang with '-x --skip-old-files --xattrs' (rhbz#1399036)


author: Pavel Raiskup <praiskup@redhat.com> - 1.30-1
changelog:
  - rebase to latest upstream release, per release notes
    http://lists.gnu.org/archive/html/info-gnu/2017-12/msg00011.html


author: Tony Camuso <tcamuso@redhat.com> - 1:1.9.6-3
changelog:
  - Incorporate latest upstream patches, including a newer version
    of the OpenSSL patch in 1.9.6-2
    Resolves: rhbz#1492771
    Resolves: rhbz#1499435


author: Tony Camuso <tcamuso@redhat.com> - 1:1.9.7-1
changelog:
  - Rebase to the latest upstream version.
    Resolves: rhbz#1511799
  - Do not override OPTFLAGS in the make
    Resolves: rhbz#1620070


author: Tony Camuso <tcamuso@redhat.com> - 1:1.9.12-1
changelog:
  - Add patch to revert "Disable GCC9 address-of-packed-member warning"
    While it was able to build locally with 'rhpkg local', the brew
    build failed, because the compiler on the brew systems did not
    recognized the new GCC9 command line flag:
    -Wno-address-of-packed-member


author: Tony Camuso <tcamuso@redhat.com> - 1:1.9.12-2
changelog:
  - Fix build issues with one upstream patch.
    This patch also reverts the previous patch concerning the
    -Wno-address-of-packed-member cflag.
    Resolves: rhbz#1847938


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.0-0
changelog:
  Upgrade to latest upstream version
    Added upstream patch to remove deprecated man pages
    Resolves: rhbz#1857068


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.0-1
changelog:
  Build problem creating directory for grub modules. We can't
    know if the modules are there, so it's up to the end user to
    find the modules and copy them to the correct location.
    Specifically, for systems booting from EFI, the
    /boot/efi/EFI/redhat/x86_64-efi/multiboot2.mod file, if it
    exists, must be copied to the /boot/efi/EFI/redhat/x86_64-efi/
    directory. If that file does not exist, then the system has
    the wrong version of grub for using tboot in an EFI system.
    Resolves: rhbz#1857068


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.0-1
changelog:
  Need to add BuildRequires: perl, since it has beem moved
    from BuildRoot.
    See: https://fedoraproject.org/wiki/Packaging:Perl#Build_Dependencies
    Resolves: rhbz#1857068


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.1-1
changelog:
  Upgrade to tboot-1.10.2-1 provides some bug fixes and updates.
    Remove 0001-Do-not-install-man-pages-for-deprecated-tools.patch
    from the git repo, since it is no longer needed.
    Resolves: rhbz#1857068
    Resolves: rhbz#1873296
    Resolves: rhbz#1920386


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.5-1
changelog:
  Upgrade to tboot-1.10.5-1 for fixes and updates.
    Added a scriptlet to the tboot.spec file to automatically install
    grub2-efi-x64-modules and move them to the correct directory.
    Resolves: rhbz#2040082
    Resolves: rhbz#2041759


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.5-2
changelog:
  - The install scriptlet in %post was not choosing the correct
    grubenv directory. In RHEL8, the efi and legacy bios grubenv
    directories are different. This change assures that the
    correct directory is used for grub.cfg and related modules.
    Added a %postun section to cleanup when removing tboot with
    dnf erase.
    Resolves: rhbz#2121836


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1:8.6.6-2
changelog:
  - Splitted documentation to the doc subpackage
    Resolves: rhbz#1380291
  - Fixed whitespace
  - Dropped obsoleted defattr


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1:8.6.8-2
changelog:
  - Reverted _module_build macro check which fixes systemtap probes on RHEL-8
    Resolves: rhbz#1579386


author: Petr Pisar <ppisar@redhat.com> - 1.8-1
changelog:
  - 1.8 bump
  - License changed from GPLv2+ to (GPLv3+ and GFDL)
  - Disable printing command failure in POSIX mode


author: Filipe Rosset <rosset.filipe@gmail.com> - 2.5-1
changelog:
  - New upstream release 2.5 - fixes rhbz #1449666
  - https://raw.githubusercontent.com/tmux/tmux/2.5/CHANGES


author: Filipe Rosset <rosset.filipe@gmail.com> - 2.5-4
changelog:
  - Fixes rhbz #1476851 tmux bell-action other not working
  - Fixes rhbz #1476892 tmux update in F26 broke tmuxinator


author: Michal Schmidt <mschmidt@redhat.com> - 1.3.8-6
changelog:
  - Fix FTBFS with current autotools (#1083627)
  - Drop tpm-tools-1.3.7-build.patch, the package builds without it (#952372)


author: Michal Schmidt <mschmidt@redhat.com> - 1.3.9-1
changelog:
  - Upstream release 1.3.9.
  - Add fixes for build errors with OpenSSL 1.1.
  - Add fixes for NULL cipher context use in seal/unseal.
  - spec file modernization.


author: Sun Yunying <yunying.sun@intel.com> - 1.1.0-6
changelog:
  - Add tss user if doesn't currently exist - PR#1 from Jerry Snitselaar
  - Removed source tarball and cleared it from .gitignore


author: Javier Martinez Canillas <javierm@redhat.com> - 2.0.0-1
changelog:
  - Download the distributed tarball instead of the source code tarball
  - Update URLs to point to the new project location
  - Update to 2.0.0 release


author: Yunying Sun <yunying.sun@intel.com> - 3.1.0-1
changelog:
  - Update Requires version of tpm2-tss to 2.0.0
  - Remove BuildRequires for tcti-abrmd since it is optional
  - Remove BuildRequires for tcti-{device,mssim} as it is now dynamically loaded
  - Update to 3.1.0 release


author: Jerry Snitselaar <jsnitsel@redhat.com> - 3.1.1-4
changelog:
  - lib/tpm2_options: restore TCTI configuration environment variables
  - tpm2_getcap: restore tool output to print properties with TPM_PT prefix
  resolves: rhbz#1648001


author: Jerry Snitselaar <jsnitsel@redhat.com> - 4.1.1-2
changelog:
  - Fix ESYS_TR hierarchy transition.
  - Refactor fix_esys_hierarchies to return actual TSS2_RC return code.
  - tpm2_alg_util.c: fix a bug where the string rsa3072 wasn't being parsed.
  - tpm2_create.c: Fix an issue where userwithauth attr cleared if policy specified.
  - tpm2_hierarchycontrol: Fix bug where hierarchycontrol operation failed silently.
  - tpm2_nvdefine.c: Fix error reporting message.
  - tpm2_policyor: Fix silent failure for invalid/unspecified policy digest alg.
  resolves: rhbz#1854774


author: Jerry Snitselaar <jsnitsel@redhat.com> - 4.1.1-3
changelog:
  - Fix resource leak.
  - Fix to restrict policy digest size.
  - Fix incompatible pointer cast.
  - Fix error message in files_load_##name
  - Fix issue where execution couldn't reach function return.
  resolves: rhbz#1920821


author: Javier Martinez Canillas <javierm@redhat.com> - 1.3.0-0.1.rc2
changelog:
  - Update to 1.3.0 release candidate 2 (RHBZ#1508870)
  - Remove global pkg_prefix since now the upstream repo and package names match
  - Update URLs to point to the new project location
  - Remove -Wno-int-in-bool-context compiler flag since now upstream takes care
  - Remove %doc directive since README.md and CHANGELOG.md are not in the tarball
  - Add patch to include a LICENSE since the generated tarball does not have it


author: Javier Martinez Canillas <javierm@redhat.com> - 1.4.0-1
changelog:
  - Update URLs to point to the new project location
  - Add README.md CHANGELOG.md to %files directive
  - Update to 1.4.0 release (RHBZ#1508870)


author: Yunying Sun <yunying.sun@intel.com> - 2.0.0-1
changelog:
  - Update to 2.0.0 release (RHBZ#1508870)
  - Remove patch file 60-tpm-udev.rules, use upstream tpm-udev.rules instead
  - Disable ESAPI to fix build errors caused by dependency to libgcrypt 1.6.0
  - Add scriptlet to fix Rpath errors
  - Update file installation paths and names accordingly


author: Yunying Sun <yunying.sun@intel.com> - 2.0.0-2
changelog:
  - Re-enable ESAPI since gcrypt dependency is not an issue for Fedora
  - Bump release version to 2.0.0-2


author: Jerry Snitselaar <jsnitsel@redhat.com> - 2.3.2-3
changelog:
  - Add tss user if doesn't exist.
  - Update exported symbols map for libtss2-mu
  - esys: Check object handle node before calling compute_session_value
  - esys: fix resource name calculation
  - esys: fix Esys_StartAuthSession called with optional params
  - esys: fix keysize of ECC curve TPM2_ECC_NISTP224
  - esys: fixup compute_encrypted_salt error handling
  - esys: use memcmp in byte array comparison
  - esys: zero out ctx->salt after startAuthSession_finish
  - mu: Remove use of VLAs for Marshalling TPML types
  - return proper error code on memory allocation failure
  - sys: match counter variable type for cmdAuthsArray->count
  - tcti-device: getPollHandles should allow num_handles query
  - tctildr: fix segmentation fault if name_conf is too big
  resolves: rhbz#1879071 rhbz#1855180


author: Jerry Snitselaar <jsnitsel@redhat.com> - 2.3.2-4
changelog:
  - Fix hmac calculation for tpm2_clear command.
  - Remove private implementation of strndup.
  resolves: rhbz#1920825 rhbz#1940861


author: John Kacur <jkacur@redhat.com> - 2.7-8
changelog:
  - Install kernelshark manpage with kernelshark subpackage, not with trace-cmd
  Resolves: rhbz#1678252


author: Kamil Dudka <kdudka@redhat.com> - 1.7.0-11
changelog:
  - do not escape UTF-8 chars in file names by default in UTF-8 locale (#1480778)
  - modernize spec file (Group, BuildRoot, autosetup, clean, defattr)


author: Tomáš Mráz <tmraz@redhat.com> 0.3.13-4
changelog:
  - Split libtspi to a trousers-lib subpackage (#1225062)
  - Fix FTBFS with current gcc (drop inline keyword when bogus)


author: Jerry Snitselaar <jsnitsel@redhat.com> - 0.3.15-1
changelog:
  - Rebase to 0.3.15
  - Fix CVE-2020-24330 CVE-2020-24331 CVE-2020-24332
  resolves: rhbz#1725782 rhbz#1877517 rhbz#1882402 rhbz#1882414


author: Merlin Mathesius <mmathesi@redhat.com> - 1027-1
changelog:
  - Version bump. Now supported for all architectures.
  - Generate man pages since they are no longer included in source archive.


author: Jerry Snitselaar <jsnitsel@redhat.com> - 1234-5
changelog:
  - Move header files to ibmtss directory.
  - Check return value of TSS_Hash_Generate.
  resolves: rhbz#1636245


author: John Kacur <jkacur@redhat.com> - 0.14-2
changelog:
  - Add method to compare class cpu for sorting
  - Use args attributes for exceptions for python3
  Resolves: rhbz#1651465


author: John Kacur <jkacur@redhat.com> - 0.15-1
changelog:
  - Upgrade to latest upstream code
  - Upstream drops python-schedutils and uses built-in schedutils
  Resolves: rhbz#1890558


author: John Kacur <jkacur@redhat.com> - 0.16-4
changelog:
  - Make it clear in online help and man pages that --include and --isolate
    affect IRQs as well as threads
  Resolves: rhbz#1886804


author: Leah Leshchinsky <lleshchi@redhat.com> - 0.17-2
changelog:
  - Fix typo for variable parm
  - Handle get_policy_and_rtprio exceptions
  - Remove finally block in get_policy_and_rtprio
  Resolves: rhbz#2049746


author: John Kacur <jkacur@redhat.com> - 0.18-8
changelog:
  - Remove deprecated distutils from setup
  - Adjust SPDX patch to accomdate the removed distutils
  Resolves: RHEL-19037


author: John Kacur <jkacur@redhat.com> - 0.18-9
changelog:
  - Don't start the gui if a display is not available
  - Revert removing distutils for rhel8
  - Update the License tag in the specfile to the spdx version
  Resolves: RHEL-19179


author: James Cheng <james.cheng@oracle.com> - 2.10.0-15.0.1
changelog:
  - Added iscsi plugin, and
    - added oci-rps-xps profile [Orabug: 28397039]
    - added oci-busy-polling profile [Orabug: 28748149]
    - added oci-cpu-power profile


author: Masud Khandker <masud.khandker@oracle.com> - 2.10.0-15.0.2
changelog:
  - Added profiles-oci-recommend package [Orabug: 29632202]
  - Modified the patch for ol8 [Orabug: 29560068] (james.cheng@oracle.com)


author: Tianyue Lan <tianyue.lan@oracle.com> - 2.10.0-15.0.3
changelog:
  - OL8 does not support System Purpose [Orabug: 29443881]
    Remove syspurpose_role option in recommend.conf.


author: James Cheng <james.cheng@oracle.com> - 2.10.0-15.0.5
changelog:
  - Added oci-nic profile and updated profiles-oci-recommend [Orabug: 29869969]
    for increasing combined channels to 16 on NICs with bnxt_en driver on BM


author: Frank Deng <frank.deng@oracle.com> - 2.10.0-15.0.7
changelog:
  - Differ archs and x86 CPU vendors in plugin cpu
  - Set AMD CPU freq governor to ondemand when unapplying cpu tunings [Orabug: 30033199]


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.12.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1685585
    - sap-netweaver: changed values of kernel.shmall and kernel.shmmax to RHEL-8 defaults
      resolves: rhbz#1708418
    - sap-netweaver: changed value of kernel.sem to RHEL-8 default
      resolves: rhbz#1701394
    - sap-hana-vmware: dropped profile
      resolves: rhbz#1715541
    - s2kb function: fixed to be compatible with python3
      resolves: rhbz#1684122
    - do fallback to the powersave governor (balanced and powersave profiles)
      resolves: rhbz#1679205
    - added support for negation of CPU list
      resolves: rhbz#1676588
    - switched from sysctl tool to own implementation
      resolves: rhbz#1666678
    - realtime-virtual-host: added tsc-deadline=on to qemu cmdline
      resolves: rhbz#1554458
    - fixed handling of devices that have been removed and re-attached
      resolves: rhbz#1677730


author: Tianyue Lan <tianyue.lan@oracle.com> - 2.12.0-3.0.1
changelog:
  - Set AMD CPU freq governor to ondemand when unapplying cpu tunings [Orabug: 30033199]
  - Restored the system rules in recommend.conf [Orabug: 29962987]
  - Added oci-nic profile and updated profiles-oci-recommend [Orabug: 29869969]
    for increasing combined channels to 16 on NICs with bnxt_en driver on BM
  - Do not access xps_cpus on single queue devices [Orabug: 29894296]
  - OL8 does not support System Purpose [Orabug: 29443881]
    Remove syspurpose_role option in recommend.conf.
  - Added profiles-oci-recommend package [Orabug: 29632202]
  - Modified the patch for ol8 [Orabug: 29560068] (james.cheng@oracle.com)
  - Added iscsi plugin, and
    - added oci-rps-xps profile [Orabug: 28397039]
    - added oci-busy-polling profile [Orabug: 28748149]
    - added oci-cpu-power profile


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.13.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1738250
    - cpu: fixed checking if EPB is supported
      resolves: rhbz#1690929
    - scheduler: fixed IRQ SMP affinity verification to respect ignore_missing
      resolves: rhbz#1729936
    - realtime: enabled ktimer_lockless_check
      resolves: rhbz#1734096
    - plugins: support cpuinfo_regex and uname_regex matching
      resolves: rhbz#1748965
    - sysctl: made reapply_sysctl ignore configs from /usr
      resolves: rhbz#1759597
    - added support for multiple include directives
      resolves: rhbz#1760390
    - realtime: added nowatchdog kernel command line option
      resolves: rhbz#1767614


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.13.0-1
changelog:
  - new release
    - rebased tuned to latest upstream
      related: rhbz#1738250
    - sap-hana: updated tuning
      resolves: rhbz#1779821
    - latency-performance: updated tuning
      resolves: rhbz#1779759


author: EL Errata <el-errata_ww@oracle.com> - 2.13.0-6.0.1.el8
changelog:
  - Do not use python-dmidecode [Orabug: 30730976]
  - Set AMD CPU freq governor to ondemand when unapplying cpu tunings [Orabug: 30033199]
  - Restored the system rules in recommend.conf [Orabug: 29962987]
  - Added oci-nic profile and updated profiles-oci-recommend [Orabug: 29869969]
    for increasing combined channels to 16 on NICs with bnxt_en driver on BM
  - Do not access xps_cpus on single queue devices [Orabug: 29894296]
  - OL8 does not support System Purpose [Orabug: 29443881]
    Remove syspurpose_role option in recommend.conf.
  - Added profiles-oci-recommend package [Orabug: 29632202]
  - Modified the patch for ol8 [Orabug: 29560068] (james.cheng@oracle.com)
  - Added iscsi plugin, and
    - added oci-rps-xps profile [Orabug: 28397039]
    - added oci-busy-polling profile [Orabug: 28748149]
    - added oci-cpu-power profile


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.14.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1792264
    - oracle: turned off NUMA balancing
      resolves: rhbz#1782233
    - man: documented the possibility to apply multiple profiles
      resolves: rhbz#1794337
    - cpu-partitioning: disabled kernel.timer_migration
      resolves: rhbz#1797629
    - profiles: new profile optimize-serial-console
      resolves: rhbz#1840689
    - added support for a post-loaded profile
      resolves: rhbz#1798183
    - plugins: new irqbalance plugin
      resolves: rhbz#1784645
    - throughput-performance: added architecture specific tuning for Marvell ThunderX
      resolves: rhbz#1746961
    - throughput-performance: added architecture specific tuning for AMD
      resolves: rhbz#1746957
    - scheduler: added support for cgroups
      resolves: rhbz#1784648


author: EL Errata <el-errata_ww@oracle.com> - 2.14.0-3.0.1
changelog:
  - Updated patch with the more recent version [Orabug: 30730976]
  - Do not use python-dmidecode [Orabug: 30730976]
  - Set AMD CPU freq governor to ondemand when unapplying cpu tunings [Orabug: 30033199]
  - Restored the system rules in recommend.conf [Orabug: 29962987]
  - Added oci-nic profile and updated profiles-oci-recommend [Orabug: 29869969]
    for increasing combined channels to 16 on NICs with bnxt_en driver on BM
  - Do not access xps_cpus on single queue devices [Orabug: 29894296]
  - OL8 does not support System Purpose [Orabug: 29443881]
    Remove syspurpose_role option in recommend.conf.
  - Added profiles-oci-recommend package [Orabug: 29632202]
  - Modified the patch for ol8 [Orabug: 29560068] (james.cheng@oracle.com)
  - Added iscsi plugin, and
    - added oci-rps-xps profile [Orabug: 28397039]
    - added oci-busy-polling profile [Orabug: 28748149]
    - added oci-cpu-power profile


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.14.0-3.1
changelog:
  - realtime-virtual-host: remove lapic advancement calculation and
    related qemu-kvm-tools-rhev requirement
    Resolves: rhbz#1884544


author: Jing-Yao Chen <jing-yao.chen@oracle.com> - 2.14.0-3.0.2.el8_3.2
changelog:
  - Fix RPS/XPS and busy polling optimization not getting applied [Orabug: 32153315]
  - Fix error in uninstalling tuned [Orabug: 351528377]


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.14.0-4
changelog:
  - realtime-virtual-host: remove lapic advancement calculation and
    related qemu-kvm-tools-rhev requirement
    Resolves: rhbz#1845717


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.15.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1874052
    - added plugin service for linux services control
      resolves: rhbz#1869991
    - scheduler: added default_irq_smp_affinity option
      resolves: rhbz#1896348
    - bootloader: skip boom managed BLS snippets
      resolves: rhbz#1901532
    - scheduler: added perf_process_fork option to enable processing of fork
      resolves: rhbz#1894610
    - scheduler: added perf_mmap_pages option to set perf buffer size
      resolves: rhbz#1890219
    - bootloader: fixed cmdline duplication with BLS and grub2-mkconfig
      resolves: rhbz#1777874


author: EL Errata <el-errata_ww@oracle.com> - 2.15.0-2.0.1
changelog:
  - Fix RPS/XPS and busy polling optimization not getting applied [Orabug: 32153315]
  - Fix error in uninstalling tuned [Orabug: 351528377]
  - Updated patch with the more recent version [Orabug: 30730976]
  - Set AMD CPU freq governor to ondemand when unapplying cpu tunings [Orabug: 30033199]
  - Restored the system rules in recommend.conf [Orabug: 29962987]
  - Added oci-nic profile and updated profiles-oci-recommend [Orabug: 29869969]
    for increasing combined channels to 16 on NICs with bnxt_en driver on BM
  - Do not access xps_cpus on single queue devices [Orabug: 29894296]
  - OL8 does not support System Purpose [Orabug: 29443881]
    Remove syspurpose_role option in recommend.conf.
  - Added profiles-oci-recommend package [Orabug: 29632202]
  - Modified the patch for ol8 [Orabug: 29560068] (james.cheng@oracle.com)
  - Added iscsi plugin, and
    - added oci-rps-xps profile [Orabug: 28397039]
    - added oci-busy-polling profile [Orabug: 28748149]
    - added oci-cpu-power profile


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.16.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1936426
    - realtime: "isolate_managed_irq=Y" should be mentioned in
      "/etc/tuned/realtime-virtual-*-variables.conf"
      resolves: rhbz#1817827
    - realtime: changed tuned default to "isolcpus=domain,managed_irq,X-Y"
      resolves: rhbz#1820626
    - applying a profile with multiple inheritance where parents include a common
      ancestor fails
      resolves: rhbz#1825882
    - failure in moving i40e IRQ threads to housekeeping CPUs from isolated CPUs
      resolves: rhbz#1933069
    - sort network devices before matching by regex
      resolves: rhbz#1939970
    - net: fixed traceback while adjusting the netdev queue count
      resolves: rhbz#1943291
    - net: fixed traceback if the first listed device returns netlink error
      resolves: rhbz#1944686
    - realtime: improve verification
      resolves: rhbz#1947858
    - bootloader: add support for the rpm-ostree
      resolves: rhbz#1950164
    - net: fixed traceback if a device channel contains n/a
      resolves: rhbz#1974071
    - mssql: updated the profile
      resolves: rhbz#1942733


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.18.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#2003833
    - profiles: fix improper parsing of include directive
      resolves: rhbz#2017924
    - disk: added support for the nvme
      resolves: rhbz#1854816
    - cpu: extended cstate force_latency syntax to allow skipping zero latency
      resolves: rhbz#2002744
    - net: added support for the txqueuelen
      resolves: rhbz#2015044
    - bootloader: on s390(x) remove TuneD variables from the BLS
      resolves: rhbz#1978786
    - daemon: don't do full rollback on systemd failure
      resolves: rhbz#2011459


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.18.0-1
changelog:
  - new release
    - rebased tuned to latest upstream
      related: rhbz#2003833
    - tuned-gui: fixed creation of new profile


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.19.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#2057602
    - fixed parsing of inline comments
      resolves: rhbz#2060138
    - added support for quotes in isolated_cores specification
      resolves: rhbz#1891036
    - recommend: preset balanced profile for notebook, laptop or portable if
      syspurpose is not defined
      resolves: rhbz#1896717


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.20.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#2133814
    - systemd: relax polkit requirement
      resolves: rhbz#2065591
    - sysvinit: fixed path
    - plugin_cpu: added support for pm_qos_resume_latency_us
    - do not exit on duplicate config lines
      resolves: rhbz#2071418
    - profiles: new cpu-partitioning-powersave profile
    - profiles: new profile for AWS EC2
    - API: add support for moving devices between instances
    - D-Bus: send tracebacks through D-Bus only in debug mode
    - Makefile: added fix for python-3.12
    - throughput-performance: set net.core.somaxconn to at least 2048
      resolves: rhbz#1998310
    - plugin_scheduler: do not leak FDs from the perf
      resolves: rhbz#2080227
    - plugin_cpu: added support for intel_pstate scaling driver
    - added support for the API access through the Unix Domain Socket


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.21.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#2182119
    - sap-hana: new profile sap-hana-kvm-guest
      resolves: rhbz#2173740
    - serialized SIGHUP handler to prevent possible bootcmdline corruption
      resolves: rhbz#2215298


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.22.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: RHEL-17119
    - print all arguments of failing commands in error messages
    - plugin_sysctl: added support for sysctl names with slash
    - tuned-adm: added support for moving devices between plugin instances
    - api: added methods for retrieval of plugin instances and devices
    - plugin_cpu: amd-pstate mentioned instead of just intel_pstate
    - hotplug: do not report ENOENT errors on device remove
    - plugin_sysctl: expand variables when reporting overrides
    - plugin_acpi: new plugin which handles ACPI platform_profile
    - plugin_bootloader: skip calling rpm-ostree kargs in no-op case
    - plugin_cpu: support cstate settings of pm_qos_resume_latency_us
    - scheduler: add option for ignoring IRQs affinity
    - plugin_intel_uncore: new plugin for uncore setting


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.22.0-1
changelog:
  - new release
    - rebased tuned to latest upstream
      related: RHEL-17119
    - lower CPU usage by using runtime=0 in profiles using scheduler plugin
      resolves: RHEL-6869


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.22.1-1
changelog:
  - new release
    - rebased tuned to latest upstream
      related: RHEL-17119
    - renamed intel_uncore plugin to uncore
    - network-throughput: increased net.ipv4.tcp_rmem default value


author: Pavol Žáčik <pzacik@redhat.com> - 2.22.1-6
changelog:
  - Make hdparm device checks lazy
    Resolves: RHEL-71457
  - Disable the amd.scheduler plug-in instance in the postgresql profile
    Resolves: RHEL-70470


author: Patsy Franklin <pfrankli@redhat.com> - 2017c-1
changelog:
  - Rebase to tzdata-2017c.
    - Northern Cyprus will revert to using EQ rules on October 29, 2017.
    - Sudan will switch from +03 to +02 on November 1, 2017.
    - Tonga will not change it's clocks on Novemeber 5, 2017 ending it's
      experiment with DST.
    - Fiji DST will end on January 14, 2018 rather than January 21, 2018.
    - Namibia - starting September 3, 2017 switches from +)1 with DST to
      +02 all year.  This change takes effect April 1, 2018.
    - Turks & Caicos changes from -04 all year to -05 with US DST starting
      on March 11, 2018.  Effective change date is November 4, 2018.
    - tzdata now includes two text versions of the time zone data - tzdata.zi
      and leapseconds.
    - Includes two patches to deal with build issues.


author: Patsy Franklin <pfrankli@redhat.com> - 2018c-1
changelog:
  - Rebase to tzdata-2018c:
    - São Tomé and Príncipe changed from +00 to +01 on January 1, 2018
    - Brazil's DST will start on the first Sunday in November
    - Support for the new zic -t option.
    - Add back pacificnew file omitted in tzdata-2018a


author: Patsy Franklin <pfrankli@redhat.com> - 2018d-1
changelog:
  - Rebase to tzdata-2018d:
    - DST for Asia/Gaza and Asia/Hebron has changed 
      from March 31 to March 24.
    - Antarctica/Casey station changed to UTC+8 on March 11.


author: Patsy Franklin <pfrankli@redhat.com> - 2018e-1
changelog:
  - Rebase to tzdata-2018e
    - North Korea changed from UTC+8:30 to UTC+9 on May 5, 2018.
    - In this update, the upstream project now defaults to using
      the "vanguard" data implementation which includes negative DST offsets.


author: Patsy Griffin Franklin <pfrankli@redhat.com> - 2018g-1
changelog:
  - Rebase to tzdata-2018g
    - Morocco will remain at UTC+1 rather than switching back to UTC+0 as
      planned.  This change is effective Octobober 28, 2018.
  - Include changes introduced in tzdata-2018f
    - Volgograd will change from UTC+03 to UTC+04 on 2018-10-28 at 02:00.
    - Fiji will end DST on 2019-01-13 instead of the 2019-01-20 as
      previously predicted.
    - Most of Chile will end DST on the first Saturday in April at 24:00
      and restart DST on the first Saturday in September at 24:00.


author: Patsy Griffin Franklin <pfrankli@redhat.com> - 2018i-1
changelog:
  - Rebase to tzdata-2018i (includes changes from tzdata-2018h)
    - São Tomé and Príncipe changed from UTC+01 to UTC+00 on 2019-01-01.
    - Qyzylorda, Kazakhstan changed from UTC+06 to UTC+05 on 2018-12-21.
    - Created a new zone Asia/Qostanay since Qostanay, Kazakhstan didn't 
      transition with the Qyzylorda change.
    - Metlakatla, Alaska will observe PST for this winter only.
    - Predict that Morocco will continue to adjust clocks around Ramadan.
    - Also include predictions for Iran from 2038 through 2090.


author: Patsy Griffin Franklin <patsy@redhat.com> - 2019a-1
changelog:
  - Rebase to tzdata-2019a
    - Palestine will start DST on 2019-03-30, rather than 2019-03-23 as
      previously predicted.
    - Metlakatla rejoined Alaska time on 2019-01-20, ending its observances
      of Pacific standard time.


author: Patsy Griffin <patsy@redhat.com> - 2019b-1
changelog:
  - Rebase to tzdata-2019b
    - Brazil will no longer observe DST going forward.
    - The 2019 spring transition for Palestine occurred 03-29, not 03-30.


author: Patsy Griffin <patsy@redhat.com> - 2019c-1
changelog:
  - Rebase to tzdata-2019c
    - Fiji will observe DST from 2019-11-10 to 2020-01-12.
    - Norfolk Island will begin observing Australian-style DST on 2019-10-06.


author: Patsy Griffin <patsy@redhat.com> - 2020a-1
changelog:
  - Rebase to tzdata-2020a
    - Morocco will spring forward on 2020-05-31 rather than
      previously predicted 2020-05-24.
    - Canada's Yukon region changed to year round UTC -07
      effective 2020-03-08.
    - America/Godthab was renamed to America/Nuuk.


author: Patsy Griffin <patsy@redhat.com> - 2020b-1
changelog:
  - Rebase to tzdata-2020b
    - Yukon timezones represented by America/Whitehorse and
      America/Dawson will change time zone rules from -08/-07 to
      permanent -07 on 2020-11-01, not on 2020-03-08 as 2020a had it.
    - The most recent winter(+08)/summer(+11) transition for Casey Station,
      Antarctica was 2020-10-04 00:01.
    - Remove obsolete files pacificnew, systemv, and yearistype.sh
      from the distribution.


author: Patsy Griffin <patsy@redhat.com> - 2020b-2
changelog:
  - Include the upstream patch to support pacificnew for java tzupdater.
  - Set POSIXRULES macro to continue installing posixrules file.


author: Patsy Griffin <patsy@redhat.com> - 2020c-1
changelog:
  - Rebase to tzdata-2020c
    - Fiji starts DST later than usual, on 2020-12-20.
    - Rearguard now provides an empty file pacificnew to support
      downstream software that expects it.


author: Patsy Griffin <patsy@redhat.com> - 2020d-1
changelog:
  - Rebase to tzdata-2020d
   - Palestine will end summer time on 2020-10-24 rather than the
     predicted 2020-10-31.


author: Patsy Griffin <patsy@redhat.com> - 2020f-1
changelog:
  - Rebase to tzdata-2020f including changes for tzdata-2020e
    - tzdata-2020f fixes a bug in tzdata-2020e that caused an
      invalid zi file in rearguard format
    - Volgograd changes time zone from UTC+04 to UTC+03 on 2020-12-27.
    - Australia/Currie is identical to Australia/Hobart for all
      timestamps since 1970 and was therefore created by mistake,
      now moved to the "backward" file.


author: Patsy Griffin <patsy@redhat.com> - 2021b-1
changelog:
  - Rebase to tzdata-2021b
    - Innclude patch for Mayen
    - Jordan now starts DST on February's last Thursday.
    - Samoa no longer observes DST.
    - Merge more location-based Zones whose timestamps agree since 1970.
    - Move some backward-compatibility links to 'backward'.
    - Rename Pacific/Enderbury to Pacific/Kanton.
    - Correct many pre-1993 transitions in Malawi, Portugal, etc.
    - zic now creates each output file or link atomically.
    - zic -L no longer omits the POSIX TZ string in its output.
    - zic fixes for truncation and leap second table expiration.
    - zic now follows POSIX for TZ strings using all-year DST.
    - Fix some localtime crashes and bugs in obscure cases.
    - zdump -v now outputs more-useful boundary cases.
    - tzfile.5 better matches a draft successor to RFC 8536.


author: Patsy Griffin <patsy@redhat.com> - 2021c-1
changelog:
  - Rebase to tzdata-2021c
    - Revert most of 2021b changes to 'backward'.
    - Fix 'zic -b fat' bug in pre-1970 32-bit data.
    - Fix two Link line typos.
    - Distribute SECURITY file.


author: Patsy Griffin <patsy@redhat.com> - 2021c-1
changelog:
  - Rebase to tzdata-2021c - supersedes tzdata-2021b
    - Revert most of 2021b changes to 'backward'.
    - Fix 'zic -b fat' bug in pre-1970 32-bit data.
    - Fix two Link line typos.
    - Distribute SECURITY file.
  - Includes changes in tzdata-2021b
    - Innclude patch for Mayen
    - Jordan now starts DST on February's last Thursday.
    - Samoa no longer observes DST.
    - Merge more location-based Zones whose timestamps agree since 1970.
    - Move some backward-compatibility links to 'backward'.
    - Rename Pacific/Enderbury to Pacific/Kanton.
    - Correct many pre-1993 transitions in Malawi, Portugal, etc.
    - zic now creates each output file or link atomically.
    - zic -L no longer omits the POSIX TZ string in its output.
    - zic fixes for truncation and leap second table expiration.
    - zic now follows POSIX for TZ strings using all-year DST.
    - Fix some localtime crashes and bugs in obscure cases.
    - zdump -v now outputs more-useful boundary cases.
    - tzfile.5 better matches a draft successor to RFC 8536.


author: Patsy Griffin <patsy@redhat.com> - 2021e-1
changelog:
  - Rebase to tzdata-2021e - supersedes tzdata-2021d
    - Pacific/Fiji suspended DST for the 2021/2022 season.
    - 'zic -r' now marks unspecified timestamps with "-00".
    - Palestine will fall back 2021-10-29 at 01:00, rather
      than the predicted 2021-10-30.


author: Patsy Griffin <patsy@redhat.com> - 2022a-1
changelog:
  - Rebase to tzdata-2022a
    - Palestine springs forward on 2022-03-27, not -03-26.
    - zdump -v now outputs better failure information
    - fixes for code that reads corrupted TZif data


author: Patsy Griffin <patsy@redhat.com> - 2022b-1
changelog:
  - Rebase to tzdata-2022b
    - Chile transitions to DST on 2022-09-11, not 2022-09-04
    - 'make install' now defaults LOCALTIME to Factory rather than GMT
    - More zones that are the same since 1970 have been moved to backzone.
    - Include patch for awk workaround.


author: Patsy Griffin <patsy@redhat.com> - 2022c-1
changelog:
  - Rebase to tzdata-2022c - supersedes tzdata-2022b
    - Add a work-around for an awk bug in FreeBSD, macOS, etc.
    - Improve tzselect with respect to intercontinental Zones.


author: Patsy Griffin <patsy@redhat.com> - 2022d-1
changelog:
  - Rebase to tzdata-2022d
    - Palestine's DST transition will be on October 29, 2022,
      not October 28, 2022.
    - Europe/Uzhgorod and Europe/Zaporozhye are moved to 'backzone'.


author: Patsy Griffin <patsy@redhat.com> - 2022e-1
changelog:
  - Rebase to tzdata-2022e
    - Jordan and Syria cancelled the DST transition planned
      for 2022-10-28, remaining at +03 permanently.


author: Patsy Griffin <patsy@redhat.com> - 2022f-1
changelog:
  - Rebase to tzdata-2022f
    - Mexico will stop observing DST except near the US border.
    - Chihuahua moved to -06 year round starting on 2022-10-30.
    - Fiji no longer observes DST.


author: Patsy Griffin <patsy@redhat.com> - 2022g-1
changelog:
  - Rebase to tzdata-2022g
    - The northern edge of the Mexican state of Chihuahua will
      change time zone to agree with nearby US locations on
      2022-11-30.
    - Added a new Zone America/Ciudad_Juarez that splits from
      America/Ojinaga.


author: Patsy Griffin <patsy@redhat.com> - 2023a-1
changelog:
  - Rebase to tzdata-2023a
    - Egypt reintroduced DST, from April through October.
    - Morocco springs forward April 23, not April 30.
    - Palestine delayed the start of DST this year.


author: Patsy Griffin <patsy@redhat.com> - 2023d-1
changelog:
  - Rebase to tzdata-2023d
    - Include time zone changes for Ittoqqortoormiit, Greenland
      and Vostok, Antarctica.
    - Update the expiration date for the leap-seconds.list file.
      No new leap seconds were added.


author: Darren Archibald <darren.archibald@oracle.com> - 2024a-1.0.1
changelog:
  - Rebase to tzdata-2024a
    - Kazakhstan will transition from UTC+6 to UTC+5 on 2024-03-01.
    - Palestine will spring forward a week later than previously
      predicted.


author: Patsy Griffin <patsy@redhat.com> - 2024b-1
changelog:
  - Update to tzdata-2024b
    - Improve historical data for Mexico, Mongolia, and Portugal.
    - System V names are now obsolescent.
    - The main data form now uses %z.
    - The code now conforms to RFC 8536 for early timestamps.
    - Support POSIX.1-2024, which removes asctime_r and ctime_r.
    - Assume POSIX.2-1992 or later for shell scripts.
    - SUPPORT_C89 now defaults to 1.
    - Include two upstream patches for month names as in April vs Apr.


author: Patsy Griffin <pats@redhat.com> - 2025a-1
changelog:
  Update to tzdata-2025a (RHEL-74309)
    - Paraguay is now permanently at -03. This impacts timestamps
      starting on 2025-03-22.
    - Includes improvements to pre-1991 data for the Philippines.
    - Etc/Unknown is now reserved.


author: Patsy Griffin <patsy@redhat.com> - 2025b-1
changelog:
  - Update to tzdata-2025b (RHEL-84748)
    - Chile's Aysén Region moves from -04/-03
      to -03 year-round, diverging from America/Santiago and
      creating a new zone America/Coyhaique.


author: Kamil Dudka <kdudka@redhat.com> - 2.17-5
changelog:
  - do not update currency.units from network during build
  - units_cur: validate rate data from server (#1598913)


author: Jakub Martisko <jamartis@redhat.com> - 6.0-38
changelog:
  - Fix CVE-2018-1000035 - heap based buffer overflow when opening
    password protected files.
    Resolves: 1537043


author: Jakub Martisko <jamartis@redhat.com> - 6.0-40
changelog:
  - fix several possibly unterminated strings
    When copying to OEM_CP and ISO_CP strings, the string could end unterminated
    (stncpy does not append '\0').
  - Related: #1602721


author: Jakub Martisko <jamartis@redhat.com> - 6.0-45
changelog:
  Fix a false positive zipbomb detection
  Related: 1954649
  Related: 1953565
  Related: 1969876
  Resolves: 1970326


author: Jakub Martisko <jamartis@redhat.com> - 6.0-47
changelog:
  - Fix: Unzip Fails on Large Zip Files
  - Use the patch from Debian dealing with this
  Resolves: RHEL-45997


author: Lubomir Rintel <lkundrak@v3.sk> - 2.4.0-2
changelog:
  - Add the previously omitted systemd service file (rh #1352055)
  - Fix crash with invalid arguments (rh #1358472)


author: Miloslav Trmač <mitr@redhat.com> - 1.111-10
changelog:
  - Fix a FBFS with  -Werror=format-security
    Resolves #1444750
  - Fix inconsistent dates in %changelog


author: Jiri Kucera <jkucera@redhat.com> - 1.112-2
changelog:
  - Dropped need to run autotools
  - <sys/sysmacros.h> must be now included manually
    Resolves #1611752
  - Fixed bad FSF address


author: Jiri Kucera <jkucera@redhat.com> - 1.113-2
changelog:
  - Fix typo in pam-panel-icon manpage
    Do not use deprecated selinux API
    Do not use fexecve
    Resolves: #1775931


author: Benjamin Marzinski <bmarzins@redhat.com> - 0.10.1-3
changelog:
  - Replace arch-dependent /usr/include/urcu/config.h with arch-independent
    stub when needed. (bz #1853168)
  - Added CI gating tests (bz #1682555)
  - Resolves: bz #1682555, #1853168


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.109-4
changelog:
  - Fixed a bug in the vdo script which would fail with a python backtrace
    when the script was invoked with no arguments.
  - Resolves: rhbz#1581204
  - Modified the vdo script to not allow creation of a VDO device on top of
    an already running VDO device.
  - Made the ordering of the output of vdo list stable.
  - Resolves: rhbz#1584823
  - Fixed issues with UDS on platforms where "char" is an unsigned type.
  - Converted UDS to use GCC's built-in macros for determining endianness.
  - Fixed a bug in the --vdoLogLevel option to the vdo python script when
    using python 3
  - Resolves: rhbz#1586043


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.187-6
changelog:
  - Improved man pages.
  - Resolves: rhbz#1600247
  - Modified vdo scripts to ignore (but preserve) unrecognized parameters in the
    vdo config file so that config files are compatible across versions.
  - Resolves: rhbz#1604122


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.219-8
changelog:
  - Fixed error path memory leaks in the UDS module.
  - Resolves: rhbz#1609403
  - Convered nagios scripts to monitor scripts
  - Made all configuration load errors use generic messaging in the vdo
    script.
  - Resolves: rhbz#1626237
  - Added missing va_end() calls.
  - Resolves: rhbz#1627953
  - Modified Makefile to take build flags from rpmbuild.
  - Resolves: rhbz#1624184


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.239-8
changelog:
  - Modified vdo script to use the new physical and logical growth procedures
    including support for the new table line format (the old format is still
    supported as well).
  - Resolves: rhbz#1631869


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.273-9
changelog:
  - Fixed a build dependency issue with device-mapper-devel
  - Resolves: rhbz#1650686
  - Improved checking for existing LVM physical volumes when formatting a new VDO
    volume.
  - Resolves: rhbz#1627859
  - Removed read cache statistics, configuration options, and table line
    parameters.
  - Resolves: rhbz#1639792
  - Fixed a bug which would cause the default logical size to be 480 KB smaller
    than it could be without causing over-provisioning.
  - Resolves: rhbz#1645690
  - Limited the number of logical zones to 60.
  - Resolves: rhbz#1645325
  - Removed extraneous man pages.
  - Resolves: rhbz#1649950


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.293-10
changelog:
  - Fixed a bug in the vdo script when checking the logical thread count.
  - Resolves: rhbz#1645325
  - Corrected the vdo script manpage entry for maxDiscardSize.
  - Resolves: rhbz#1651251
  - Allowed VDO backing devices to be specified by major:minor device number.
  - Resolves: rhbz#1594285
  - Fixed bugs when the vdo script is invoked against an existing device
    which is not a VDO.
  - Resolves: rhbz#1588083
  - Update vdo manpage to reflect deleted statistics.
  - Resolves: rhbz#1639792
  - Updated vdo script to handle partitioned devices
  - Resolves: rhbz#1658224


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.48-10
changelog:
  - Added bash command completion for vdostats.
    - Resolves: rhbz#1666425
  - Added missing newline to the output from vdoFormat.
    - Resolves: rhbz#1669492
  - Fixed bug in the value displayed by vdostats for statistics which are not
    currently available.
    - Resolves: rhbz#1668747
  - Updated vdo script to reflect changes in lvm.
    - Resolves: rhbz#1684249
  - Reduced error output when removing a VDO device whose backing storage is
    missing.
    - Resolves: rhbz#1684248
  - Removed the VDO Ansible module and examples from the vdo package.
    - Resolves: rhbz#1669534
    - Resolves: rhbz#1663259
  - Fixed bugs in vdo script argument parsing.
    - Resolves: rhbz#1679224


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.102-11
changelog:
  - Added bash command completion for the vdo command.
    - Resolves: rhbz#1540287
  - Modified the vdo script's list command to not display VDO devices which
    were not created with the vdo command (i.e. via LVM or using raw dm
    commands).
    - Resolves: rhbz#1686091
  - Modified vdostats to continue to work on VDO devices which were not
    created with the vdo script.
    - Resolves: rhbz#1686091
  - Modified vdo script to always close the UDS index when disabling
    deduplication on a running VDO device.
    - Resolves: rhbz#1643291


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.134-11
changelog:
  - Added UUID filtering of underlying devices when running vdo create with
    the --force flag as this failed when run on certain PVs.
  - Resolves: rhbz#1710017


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.74-14
changelog:
  - Renamed vdo2LVM to vdopreparelvm and moved its installation location to
    /usr/libexec so that it is not in common default paths as this utility is
    intended to be called from LVM, not directly by users.
  - Related: rhbz#1986930


author: - Andy Walsh <awalsh@redhat.com> - 6.2.6.3-14
changelog:
  - Added a check to vdopreparelvm to determine whether it has already been
    converted.
  - Resolves: rhbz#2017843


author: - Andy Walsh <awalsh@redhat.com> - 6.2.6.7-14
changelog:
  - Fixed bugs in the vdopreparelvm check to determine whether a device has
    already been converted.
  - Resolves: rhbz#2017843
  - Fixed an issue in the vdo-by-dev tool which could result in a failure to
    start vdo devices when some devices in the vdo config file do not exist.
  - Resolves: rhbz#2022154


author: - Andy Walsh <awalsh@redhat.com> - 6.2.6.14-14
changelog:
  - Added a tool to make LVMVDO pools read/write so that support and
    debugging tools may access them.
  - Resolves: rhbz#1999640


author: - Andy Walsh <awalsh@redhat.com> - 6.2.7.17-14
changelog:
  - Fixed excessive vdo2lvm "Retrying" messages.
  - Resolves: rhbz#1986595
  - Fixed a pylint 2+ complaint in the vdo scripts.
  - Resolves: rhbz#2072131
  - Updated vdo script documentation and help text for the uuid option.
  - Resolves: rhbz#2089957


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.18-11
changelog:
  - Added the ability to modify the UUID of a VDO device.
  - Resolves: rhbz#1713749
  - Added an import command to the vdo script to allow management of an
    existing VDO device which is not already in the vdo config file.
  - Resolves: rhbz#1737619
  - Modified the vdo script to warn the user when starting or stopping a VDO
    device if the device is already in the desired state.
  - Resolves: rhbz#1738651


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.24-11
changelog:
  - Began preparations for releasing more VDO analysis and debugging tools.
  - Relates: rhbz#1687996
  - Really added the ability to modify the UUID of a VDO device (the previous
    version omitted some of the files necessary for this feature).
  - Resolves: rhbz#1713749


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.33-12
changelog:
  - Fixed bug in the import command of the vdo script which would fail if
    there were no active dm devices.
  - Resolves: rhbz#1767491
  - Added a version command to the vdo script to report the script version.
  - Resolves: rhbz#1730429
  - Added version options to vdo utilities which did not have one.
  - Resolves: rhbz#1730429
  - Removed deprecated vdoprepareupgrade utility.
  - Resolves: rhbz#1774700


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.117-13
changelog:
  - Improved man pages and help text for vdo script and vdo utilities.
  - Resolves: rhbz#1505748
  - Resolves: rhbz#1636043
  - Resolves: rhbz#1746539
  - Modified vdoformat to display the maximum VDO size based on the
    configured slab size when formatting a volume. Modified vdo script to
    also display this output when creating a new VDO.
  - Resolves: rhbz#1659173


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.91-14
changelog:
  - Removed unused UDS bio statistics
  - Resolves: rhbz#1827762
  - Added a summary mode to vdoaudit and made this mode the default. Also
    added histograms.
  - Resolves: rhbz#1687996
  - Modified vdostats to accept short (one character) options.
  - Resolves: rhbz#1787472
  - Modified vdo script to use lsblk to identify LVM created VDO volumes.
  - Resolves: rhbz#1825344
  - Modified vdo script to avoid unnecessary config file updates when
    removing VDO volumes.
  - Resolves: rhbz#1804440
  - Fixed a cast which caused a Coverity complaint.
  - Resolves: rhbz#1827763
  - Fixed a cut&paste error in the vdosetuuid man page.
  - Resolves: rhbz#1643297
  - Fixed documentation of logical threads.
  - Resolves: rhbz#1827764
  - Began creation of a package of binaries for investigating VDO issues.
  - Resolves: rhbz#1643297
  - Updated VDO to use udev/systemd rules for startup.
  - Resolves: rhbz#1837759
  - Modified VDO volume creation to use libblkid instead of pvcreate to
    determine whether the underlying storage is already in use. Moved
    these checks from the vdo script into the vdoformat utility.
  - Resolves: rhbz#1771698
  - Modified the vdo status command to treat a running vdo volume is
    authoratative over the config file.
  - Resolves: rhbz#1790983
  - Added a new utility, vdoregenerategeometry, which can be used to
    recover a VDO whose initial blocks have been overwritten
    accidentaly.
  - Resolves: rhbz#1773421


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.100-14
changelog:
  - Modified vdoformat to display the minimum required physical size for the
    specified parameters if the format fails due to insufficient space.
  - Resolves: rhbz#1683945
  - Modified the vdo status command to report values from running devices
    rather than the config file when the devices are running.
  - Resolves: rhbz#1790983
  - Actually made the new summary mode of vdoaudit the default.
  - Resolves: rhbz#1687996
  - Fixed a bug in vdodumpmetadata and vdodumpblockmap which could result in
    the wrong block(s) being dumped.
  - Resolves: rhbz#1643297


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.114-14
changelog:
  - Fixed an index bug which can cause vdo stop to hang on systems with many
    cores.
  - Resolves: rhbz#1791056
  - Fixed typos in example monitoring scripts.
  - Resolves: rhbz#1861518


author: - Andy Walsh <awalsh@redhat.com> - 6.2.4.14-14
changelog:
  - Added --pending option to the vdo status command to indicate
    configuration options which have been modified but will not take
    effect until the next device start.
  - Resolves: rhbz#1838314


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.11-14
changelog:
  - Introduced new memory size parameter values for UDS indexes which have
    been converted from vdo script management to LVM.
  - Related: rhbz1928284
  - Modified vdo script to fail if the same option is supplied multiple
    times.
  - Resolves: rhbz#1944087
  - Fixed permissions on the vdo script's lock directory.
  - Resolves: rhbz#1952105


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.21-14
changelog:
  - Added a tool for converting a VDO volume from the vdo management script
    to LVM. The tool can be invoked from the new vdo convert command.
  - Related: rhbz#1928284
  - Fixed a (relatively harmless) buffer overflow in vdo userspace tools.
  - Resolves: rhbz#1927938


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.41-14
changelog:
  - Integrated the vdo to lvm conversion tool into the vdo management script
    and modified the tool itself to correctly convert the UDS index so that
    dedupe information is not lost by conversion.
  - Resolves: rhbz#1928284


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.62-14
changelog:
  - Removed extraneous fields from the super block of a converted index.
  - Resolves: rhbz#1965546
  - Added a parameter to the lvm conversion tool to specify the amount of
    space to free up.
  - Resolves: rhbz#1966827
  - Fixed calculation of the number of expiring chapters in a converted
    index.
  - Resolves: rhbz#1975546


author: Richard W.M. Jones <rjones@redhat.com> - 0.5-17
changelog:
  - Remove ldconfig
    https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/SU3LJVDZ7LUSJGZR5MS72BMRAFP3PQQL/


author: Zdenek Dohnal <zdohnal@redhat.com> - 8.0.1763-2
changelog:
  - 1576470 - Suggest correct packages to get embedded interpreters working
  - add libappstream-glib for appstream-util
  - 1576483 - Vim needs Python2 to build


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-8
changelog:
  - 1640919 - augroup fedora, test case failure: /CoreOS/vim/Regression/bz241308-use-augroup-for-rh-autocmds


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-16
changelog:
  - 2004974 - CVE-2021-3796 vim: use-after-free in nv_replace() in normal.c [rhel-8.5.0]
  - 2004891 - CVE-2021-3778 vim: heap-based buffer overflow in utf_ptr2char() in mbyte.c [rhel-8.5.0]


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-16.4
changelog:
  - CVE-2021-4193 vim: vulnerable to Out-of-bounds Read
  - CVE-2021-4192 vim: vulnerable to Use After Free


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-16.5
changelog:
  - CVE-2022-0261 vim: Heap-based Buffer Overflow in block_insert() in src/ops.c
  - CVE-2022-0318 vim: heap-based buffer overflow in utf_head_off() in mbyte.c


author: Tomas Korbar <tkorbar@redhat.com> - 2:8.0.1763-16.8
changelog:
  - CVE-2022-0392 vim: heap-based buffer overflow in getexmodeline() in ex_getln.c
  - Resolves: rhbz#2049403


author: Tomas Korbar <tkorbar@redhat.com> - 2:8.0.1763-16.9
changelog:
  - CVE-2022-0392 vim: heap-based buffer overflow in getexmodeline() in ex_getln.c
  - Improve fix
  - Resolves: rhbz#2049403


author: Tomas Korbar <tkorbar@redhat.com> - 2:8.0.1763-16.11
changelog:
  - CVE-2022-0413 vim: use after free in src/ex_cmds.c
  - Fix specfile problems
  - Resolves: rhbz#2048525


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-16.3
changelog:
  - 2028341 - CVE-2021-3984 vim: illegal memory access when C-indenting could lead to Heap Buffer Overflow [rhel-8.6.0]
  - 2028430 - CVE-2021-4019 vim: heap-based buffer overflow in find_help_tags() in src/help.c [rhel-8.6.0]


author: Alex Burmashev <alexander.burmashev@oracle.com> 8.0.1763-16.0.2.13
changelog:
  - Added glibc-gconv-extra to common requires to provide ISO-8859-2 [Orabug: 34114984]
  - Cleaned up changelog entry


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-17
changelog:
  - 2016201 - CVE-2021-3872 vim: heap-based buffer overflow in win_redr_status() drawscreen.c [rhel-8.6.0]


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-18
changelog:
  - fix test suite after fix for CVE-2022-0318
  - CVE-2022-0359 vim: heap-based buffer overflow in init_ccline() in ex_getln.c


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-18
changelog:
  - CVE-2022-0392 vim: heap-based buffer overflow in getexmodeline() in ex_getln.c
  - CVE-2022-0413 vim: use after free in src/ex_cmds.c


author: Darren Archibald <darren.archibald@oracle.com> - 2:8.0.1763-19.0.1.2
changelog:
  - Remove upstream references [Orabug: 31197557]
  - Added glibc-gconv-extra to common requires to provide ISO-8859-2 [Orabug: 34114984]


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-19.3
changelog:
  - CVE-2022-1785 vim: Out-of-bounds Write
  - CVE-2022-1897 vim: out-of-bounds write in vim_regsub_both() in regexp.c
  - CVE-2022-1927 vim: buffer over-read in utf_ptr2char() in mbyte.c


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-21
changelog:
  - RHEL-112003 CVE-2025-53905 vim: Vim path traversial
  - RHEL-112007 CVE-2025-53906 vim: Vim path traversal


author: Richard W.M. Jones <rjones@redhat.com> - 1.18-1
changelog:
  - New upstream version 1.18.
  - Update RPM description section with complete list of supported guests.
  - If ‘make check’ fails, dump ‘test-suite.log’.


author: Richard W.M. Jones <rjones@redhat.com> - 1.18-8
changelog:
  - Add support for Nutanix AHV
    resolves: rhbz#1756381
  - Add all patches since 1.18 was released, up to 1.20 and beyond.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 2.21-8
changelog:
  - Fix invalid [ ... ] syntax which results in complaints by zsh.
    https://bugzilla.redhat.com/show_bug.cgi?id=1546221
  - Remove pointless Group tag, buildroot cleaning and %defattr.


author: Than Ngo <than@redhat.com> - 2.21-17
changelog:
  - Resolves: #2025709, check shell correctly 
  - Resolves: #2009547, which treats function contents as aliases when parsing ksh


author: Than Ngo <than@redhat.com> - 2.21-21
changelog:
  - Add a check to ensure that /proc/$$/exe can be read
    thanks to mbliss@redhat.com for the report and the proposed patch
    Resolves: RHEL-101069


author: Davide Caratti <dcaratti@redhat.com> - 1:2.9-2
changelog:
  - Fix AP mode PMF disconnection protection bypass (CVE-2019-16275)
  - Fix NULL dereference in d-bus handler when P2P control interface is removed (rh #1752780)
  - enable WIFI_DISPLAY (rh #1755941)


author: Davide Caratti <dcaratti@redhat.com> - 1:2.9-3
changelog:
  - fix p2p_listen unexpectedly stopped after 5 seconds (rh #1693684)
  - allow changing 'bridge' via D-Bus (rh #1888050)
  - expose OWE configurability via D-Bus (rh #1888718)


author: Davide Caratti <dcaratti@redhat.com> - 1:2.9-5
changelog:
  - P2P: Fix a corner case in peer addition based on PD Request (CVE-2021-27803)
  - Fix buffer overflow when processing P2P group information (CVE-2021-0326)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:2.6-11
changelog:
  - hostapd: Avoid key reinstallation in FT handshake (CVE-2017-13082)
  - Fix PTK rekeying to generate a new ANonce
  - Prevent reinstallation of an already in-use group key and extend
    protection of GTK/IGTK reinstallation of WNM-Sleep Mode cases
    (CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081,
    CVE-2017-13087, CVE-2017-13088)
  - Prevent installation of an all-zero TK
  - TDLS: Reject TPK-TK reconfiguration
  - WNM: Ignore WNM-Sleep Mode Response without pending request
  - FT: Do not allow multiple Reassociation Response frames


author: Jiří Klimeš <blueowl@centrum.cz> - 1:2.6-12
changelog:
  - Fix crash when using MACsec without loaded macsec.ko (rh #1497640)
  - Enable Fast BSS Transition for station mode (rh #1372928)


author: Davide Caratti <dcaratti@redhat.com> - 1:2.6-15
changelog:
  - Disable build of wpa_gui (rh #1542234)
  - Fix build issue with latest kernel headers (rh #1582604)
  - Disable WEXT (rh #1537143)
  - Fix memory leak when macsec MKA/PSK is used (rh #1582511)
  - Fix authentication failure when the MAC is updated externally (rh #1582508)
  - Let the kernel discard EAPOL if packet type is PACKET_OTHERHOST (rh #1582501)


author: Darren Archibald <darren.archibald@oracle.com> - 3.1.8-5
changelog:
  - xfsdump/xfsrestore: suggest recovery for false roots may be possible using -x
  - Related: RHEL-11883
  - xfsdump: restoring inventory prevents non-directory files being restored from tape
  - related: bz#2166554
  - xfsrestore: Files from the backup go to orphanage dir because of xfsdump issue
  - related: bz#2055289


author: Pavel Reichl <preichl@redhat.com> - 3.1.8-5
changelog:
  - xfsrestore: Files from the backup go to orphanage dir because of xfsdump issue
  - related: bz#2055289


author: Pavel Reichl <preichl@redhat.com> - 3.1.8-6
changelog:
  - xfsdump: restoring inventory prevents non-directory files being restored from tape
  - related: bz#2166554


author: Pavel Reichl <preichl@redhat.com> - 3.1.8-7
changelog:
  - xfsdump/xfsrestore: suggest recovery for false roots may be possible using -x
  - Related: RHEL-11883


author: Eric Sandeen <sandeen@redhat.com> 4.19.0-1
changelog:
  - New upstream release (#1652248)
  - Note reflink default in mkfs.xfs manpage (#1641698)
  - Fix xfs_db sign extension in agi freecount (#1640090)
  - Fix xfs_repair hang on large filesystem (#1630674)


author: EL Errata <el-errata_ww@oracle.com> - 4.19.0-2.0.1
changelog:
  - Disable crc by default for compatibility with UEK [Orabug: 22711906]
  - Add proper checking for size arguments (Guangyu Sun) [Orabug: 17613612]


author: Eric Sandeen <sandeen@redhat.com> 5.0.0-1
changelog:
  - New upstream version (#1712147)
  - mkfs.xfs: validate extent size hint parameters (#1683007)
  - mkfs.xfs: null-terminate symlinks created via protofile (#1640503)
  - xfs_repair: allow '/' in attribute names (#1667354)
  - xfs_info: allow device name as parameter (#1679840)
  - xfs_quota: fix project inheritance flag handling (#1664105)
  - xfs_metadump: handle symlinks correctly (#1693074)
  - xfs_db: fix finobt record decoding with sparse inodes (#1690245)


author: Eric Sandeen <sandeen@redhat.com> 5.0.0-2
changelog:
  - mkfs.xfs: validate log stripe unit alignment (#1632596)
  - xfs_growfs: allow mounted device node as argument (#1765217)


author: Bill O'Donnell <billodo@redhat.com> 5.0.0-6
changelog:
  - xfs_repair: improve AG btree ptr validation (libxfs_verify_agbno) (#1887288)
  - mkfs.xfs: fix ASSERT on too-small device with stripe geometry (#1887401)
  - xfs_repair: fix rebuilding btree block less than minrecs (#1759452)


author: Bill O'Donnell <billodo@redhat.com> 5.0.0-7
changelog:
  - xfs_quota: document how the default quota is stored (#1850188)
  - xfs_db: skip type change if type_f unchanged (#1867474)


author: Pavel Reichl <preichl@redhat.com> - 5.0.0-11
changelog:
  - Fix xfstest fails with error "missing xfsprogs fix patch"(#2161936,#2160746)
  - Fix ignore autofs mount table entries (#2182361)


author: Pavel Reichl <preichl@redhat.com> - 5.0.0-12
changelog:
  - Fix xfs_repair progress reporting is not working (#2183398)
  - Fix man page default for sparse mkfs option (#2118564)


author: Rob Crittenden <rcritten@redhat.com> - 1.51.0-7
changelog:
  - lib: Prevent more integer overflows (CVE-2022-22822 to CVE-2022-22827)
    (#2058567, #2058576, #2058582, #2058589, #2058595, #2058602)
  - Prevent integer overflow on m_groupSize in doProlog
    (CVE-2021-46143) (#2058560)


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.3-1
changelog:
  - rebase to stable 5.2.3 per release notes:
    http://www.mail-archive.com/xz-devel@tukaani.org/msg00285.html


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.4-1
changelog:
  - rebase to 5.2.4 (rhbz#1574039), per release notes:
    https://www.mail-archive.com/xz-devel@tukaani.org/msg00295.html


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.4-2
changelog:
  - drop ppc64p7 hack, per fedora devel list discussion:
    https://lists.fedoraproject.org/archives/list/
    devel@lists.fedoraproject.org/thread/2OWD2QRDFBEC6HTPVQ7FMJENH32BWT54/
  - don't explicitly set _FILE_OFFSET_BITS, package uses AC_SYS_LARGEFILE


author: Jakub Martisko <jamartis@redhat.com> - 3.0-22
changelog:
  - Add missing linker flags
  - Port the configure patch from unzip that allows linker flags configuration
    from the spec file
  - Related: #1624188


author: Jakub Martisko <jamartis@redhat.com> - 3.0-23
changelog:
  - Set the ziperr function as noreturn
  - Fix email in the previous chnagelog entry
  - Related: #1602741


author: Pavel Raiskup <praiskup@redhat.com> - 1.2.11-1
changelog:
  - latest upstream release (rhbz#1409372)
  - cleanup rpmlint
  - revert fix for rhbz#985344
  - requires with %_isa tag
  - drop zlib Z_BLOCK flush patch (rhbz#1417355)


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-11
changelog:
  - IBM Z hardware-accelerated deflate for s390x architectures
  - IBM CRC32 optimalization for POWER 8+ architectures
  - fixed firefox crash due to zlib (#1741266)
  - added test for crc32


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-13
changelog:
  - Added -DDFLTCC parameter to configure to enable 
  - Z hardware-accelerated deflate for s390x architectures


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-13
changelog:
  - Added -DDFLTCC parameter to configure to enable 
  - Z hardware-accelerated deflate for s390x architectures (#1659433)


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-16
changelog:
  - Permit a deflateParams() parameter change
  - Another fix for Z hardware-accelerated deflate for s390x architectures
  - according to previous change by upstream


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-17
changelog:
  - Fixed DFLTCC compression level switching issues (#1875492)
  - Enabled HW compression for compression levels 1 through 6 (#1847438)
  - Fixed inflateSyncPoint() bad return value on z15 (#1888930)


author: Matej Mužila <mmuzila@redhat.com> - 1.2.11.19
changelog:
  - Fix heap-based buffer over-read or buffer overflow in inflate in inflate.c
  - Resolves: CVE-2022-37434


author: Lukas Javorsky <ljavorsk@redhat.com> - 1.2.11-19
changelog:
  - Apply IBM patch for compressBound() function
  - Source from https://github.com/madler/zlib/issues/410#issuecomment-947212824
  - Resolves: #2056900


author: Lukas Javorsky <ljavorsk@redhat.com> - 1.2.11-23
changelog:
  - Rebased Power 8 optimization patches
  - Fix for Unnecessary IFUNC resolver for crc32_z
  - Fix for python3.11 broken libxml2 and lxml on s390x


author: Kamil Dudka <kdudka@redhat.com> - 5.4.2-7
changelog:
  - avoid crash when copying empty hash table (CVE-2018-7549)
  - avoid NULL dereference when using ${(PA)...} on an empty array (CVE-2018-7548)


author: Kamil Dudka <kdudka@redhat.com> - 5.5-1
changelog:
  - update to latest upstream release, which fixes the following vulnerabilities:
      CVE-2018-1100 - stack-based buffer overflow in utils.c:checkmailpath()
      CVE-2018-1083 - stack-based buffer overflow in compctl.c:gen_matches_files()
      CVE-2018-1071 - stack-based buffer overflow in exec.c:hashcmd()


